Dog Car Barrier Seat Screen In Car For Pet, Carrier &Travel Accessories,Front Seat Barriers, For Cars, Truck And Suv,Car Shield To Keep Dogs Back

SIZE AND MATERIALS Rear partition of pet car Specification: 31.8×31.8” (WxH) ; Main material:Black mesh materialSoft steel wire; Auxiliary material repair:Metal grommetFixed STA-PUT Two strapsSupport rod;The length of the strap is adjustable and can be installed on all cars

PART INTRODUCTION Supporting rod fixing opening, high elastic anti aging knitted fabric.STA-PUT Adjusting button,Don’t worry about the lack of model length,Middle supporting rod of screen.Adjustable length headrest strap at left and rightMetal buckle can be changed according to requirements,Firm wire mesh, scratch resistantMiddle supporting rod of screen.Adjustable length headrest strap at left and rightMetal buckle can be changed according to requirements.Firm wire mesh, scratch resistant

INSTALL The first step,Take out the screen in the bag and open it carefully,Then connect the connector inside the small bag with two short rods, and then put it on the screen to support the screen;The second step, Place the screen strap around the headrest and back through the D-ring to secure;Step three,Sat-put is installed in the gap of the passenger seat from the bottom.Before installation, please watch the installation video on this product details page

STORAGE AND FOLDING As long as the support bar is removed, the pet car safety screen can be conveniently stored under the car seat. When storing, hold both sides of the screen for the mesh car, twist both hands to the opposite direction and close both hands at the same time. At this time, the screen will be twisted into three concentric circles, so that it can be conveniently packed in the packaging bag

HAND WASHABLE,MACHINE WASHABLE Please select soft mode for machine drying,Wrong washing method will seriously affect the appearance and service life of the product